APC BE425M Back-UPS 6 Outlets 425VA, 120V Battery Backup & Surge Protector
APC BE425M Back-UPS 6 Outlets 425VA, 120V
Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment.
Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Audible alarms: Provides notification of changing utility power and UPS power conditions
LED status display: Quickly understand unit and power status with visual indicators.
Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Surge only outlets: Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Battery and surge protected outlets: Back up and protect your hardware and data during power outages, surges and spikes.
APC BE425M Back-UPS 6 Outlets 425VA, 120V
Key Features
- Output power capacity: 255Watts / 425VA
- Output Connections: (4) NEMA 5-15R (Battery Backup), (2) NEMA 5-15R (Surge Protection)
- Nominal Output Voltage: 120V
- Nominal Input Voltage: 120V
- Input Connections: NEMA 5-15P
- Cord Length: 5ft (1.52meters)
- Maximum Input Current: 5.0A
- Audible alarms: Provides notification of changing utility power and UPS power conditions
- Building Wiring Fault Indicator: This LED informs users of potentially dangerous wiring problems in the wall circuit.
- LED Indicators: Provide easy-to-read status of the unit and utility power conditions.
Technical Specifications:
Output
- Max Configurable Power (Watts): 255Watts / 425VA
- Output Frequency (sync to mains): 50/60Hz +/- 3 Hz
- Topology: Standby
- Waveform type: Square wave
- Transfer Time: 6ms typical: 10ms maximum
Input
- Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
- Input voltage range for main operations: 88 - 139V
- Number of Power Cords: 1
Batteries & Runtime
- Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte: leakproof
- Typical recharge time: 8hour(s)
- Expected Battery Life (years): 3 - 5
- Battery Volt-Amp-Hour Capacity: 47
Communications & Management
- Control panel: LED Status display with On Line: On Battery
- Audible Alarm: Alarm when on battery: distinctive low battery alarm
Surge Protection and Filtering
- Surge energy rating: 180Joules
Physical
- Maximum Height: 5.52inches (140MM, 14.02CM)
- Maximum Width: 9.98inches (253MM, 25.35CM)
- Maximum Depth: 4.13inches (105MM, 10.5CM)
- Net Weight: 5.73lbs. (2.6KG)
- Shipping Weight: 6.61lbs. (3.0KG)
- Shipping Height: 8.66inches (220MM, 22.0CM)
- Shipping Width: 12.4inches (315MM, 31.5CM)
- Shipping Depth: 5.51inches (140MM, 14.0CM)
- Color: Black
Environmental
- Operating Temperature: 32 - 104 °F (0 - 40 °C)
- Operating Relative Humidity: 0 - 95 %
- Operating Elevation: 0-10000ft (0-3000meters)
- Storage Temperature: -20 - 50 °C
- Storage Relative Humidity: 0 - 95 %
- Storage Elevation: 0-50000ft (0-15000meters)
- Audible noise at 1 meter from surface of unit: 40.0dBA
Conformance
- Approvals: California (CEC) Battery Charger, cTUVus, FCC Part 15 Class B
- Equipment protection policy: Lifetime : $75000
- Standard warranty: 3 years repair or replace
Sustainable Offer Status
- RoHS: Compliant
- REACH: Contains SVHCs
- Proposition 65 Warning: Available in Documentation tab
| Price | JMD 11,033.68 |
|---|---|
| Weight | 6.610000 |
| Condition | 99 |